top of page

ASC 7400V3

Ancre 1

Universal pressure decay leak tester

The ASC 7400V3 has been developed for cases where 100 % of the production must be checked.

The accent here is on accuracy, productivity and reliability.

The part is connected to the Test port. After sealing any orifices, the part is pressurised at the desired test pressure. Then it is isolated from the pressure source and the pressure decay is measured over a short period.

A variation that exceeds the tolerance indicates the part is leaking.

This method is suitable for parts with rigid walls.

Calibrated Leaks allow an accurate setting of the acceptance level, as well as a  quick routine verification of the leak test system.

Various pressure ranges are available from 10 kPa (0,1bar) to 4 MPa

(40 bar), as well as vacuum versions, all with standard or electronic regulator.

The ASC 7400V3 is suitable for manual quality control stations, but can also perfectly be integrated in automatic test stations.

 

Feel free to contact us to find the optimal solution for your requirements, including the best way of sealing the part.

Production line leaktester ASC 7400V3, high accuracy, vacuum or pressure
ASC 7400V3
bottom of page